Couldn't load pickup availability
When you have neighbors on either side of your house with barking dogs, it's time to bring in the Dog Silencer MAX Multi-Pack.
When one dog barks, they all bark! If you are surrounded by barking dogs on all sides, 1 unit just isn’t going to cut it! The highly requested MAX Multi-Pack will help you control barking in any direction. It can also cover odd-shaped yards, multiple neighbors’ yards, large properties and other hard-to-reach areas. Enjoy your newly found peace and quiet twofold knowing you saved money by bundling!
The Dog Silencer MAX detects barking automatically and trains dogs up to 300 ft. away. The high-pressure ultrasonic sound can be heard by dogs without bothering people.
The MAX can be used in silent mode, and comes with your own colored faceplate to help blend in wherever you need it. Choose from, matte white, camo, or tree bark patterns.
The IPX4 water resistance rating protects against sprinklers and light rain. To prolong the life of your Dog Silencer MAX, use it in an area sheltered from extensive rain or direct sun.
The MAX automatically detects barking up to 75 feet away, but if the dog is outside of that range you can trigger it manually with the included remote control. In fact, one remote will activate both units at the same time!
With two Dog Silencer MAX units you’ll get double the coverage, double the control, and double the quiet you’ve been longing for!
When the dog barks near either unit, it will send out a high-pitched tone. Dogs find this sound extremely irritating, which helps them learn fairly quickly that if they stop barking, the sound stops. Having two units placed in different areas can help maintain a large coverage area, and train multiple dogs to stop barking at once.
Risk free. Your problem will be solved within 60 days or we'll happily refund the product price.
| Ranges | |
|---|---|
| Bark Detection | Up to 22.9 m |
| Stops Barking | Up to 91 m |
| Remote Control | Up to 22.9 m |
| Size | |
|---|---|
| Dimensions | 13.3 cm H × 10.8 cm W × 4.6 cm D |
| Weight | 0.45 kg |
| Power | |
|---|---|
| Options | AC Adapter 6 “AA” Batteries |
| Consumption | 1.6 W (ultrasonic) 1.8 W[/country][country="eu"]1,8 W (audible) |
| After Purchase | |
|---|---|
| Manual | PDF [559 KB] |
| Schematic | PDF [1.28 KB] |
| Warranty | 1-Year manufacturer's warranty 60-Day Money-Back Guarantee |
| Additional Info | |
|---|---|
| Water Resistance | IPX4 |
| Installation | Mounting Holes Mounting Feet Mounting Bracket (sold separately) |
Since the Dog Silencer MAX relies on direct line of sight for the training to be effective, you would need 2 units if you have multiple neighbors with barking dogs. This will insure that you are covering both neighbors at the same time, and it eliminates having to move the MAX back and forth from one side to the next.
You might also consider getting the 2-pack if you have multiple dogs in different kennels, or if you have a large property that your dog has free range of and you need to control their barking in different areas.
No, this would be the equivalent of having two radios next to each other, neither one will make the other one louder or increase the distance to how far the sound travels.
The ultrasonic sounds will emit in a cone shape of about 130°, or about 65° on each side. The sound is directional, and will have the best training results if the device is pointed directly at the dog(s) you wish to train.
Ultrasonic sound is above the hearing range of humans, but is attention grabbing and irritating to dogs. This makes a safe and effective tool for dog training. It takes your dog's focus off of barking and towards the high-pitched sound.
When using “Audio” mode, you will hear the device activate. It's recommended you use this mode when adjusting the bark sensitivity when first setting up the unit. In addition, you can use the audio mode for older dogs or dogs with poor hearing as an alternative to the ultrasonic sound training.
Using the Audio mode when setting up the device will be key into accurately gauging the sensitivity of the microphone. You will be able to hear if the device is activating too often or not often enough. Adjust the dial up or down as needed and once you hear the unit ONLY activating when the dog is barking then you can flip the switch to the Ultrasonic mode.
Cats and dogs have very similar hearing ranges, so if your cat is near the unit when it's activated, yes, it will probably bother the cat. But, the sound from the MAX does not go through walls or around corners. For example, if the device is located in the backyard, and your cat is in the front yard or even in the house, the sound should not bother him at all. If the MAX is being used indoors, you'll want to keep cats and / or rodent pets out of the room where it is being used.
No. There is no volume control by design. The device volume is pre-set and will fluctuate on its own to keep the dog guessing. The training sounds will always travel up to 300 feet (90 m)with a clear line of sight.
Think of the Sensor dial as a distance setting. If the dog is nearby, you'll want to keep it low. If he's farther away, you'll need to turn it up higher. You want the device to hear the dog barking, but if you turn the dial up too high it will detect other sounds nearby, activate too often, and will not train the dog to stop barking. In fact, turning this dial up too high can actually make the barking worse!
We do not recommend using the Dog Silencer MAX on puppies under 1-year of age. Please consult your veterinarian.
No. The high-pitched sounds emitted by our training devices cannot penetrate any solid objects such as wood fences, windows, walls or thick shrubbery.
However — sparse trees, window screens, chain link and wrought-iron fences should be okay.
We recommend you do not use any ultrasonic bark control devices in combination with invisible fence systems. This is because the sound frequencies emitted by our bark control devices are very similar to those emitted by the invisible fence collar. This may cause confusion and interfere with the dog's training.
Your purchase includes a keychain-size remote control which can be used to activate the device manually. The remote can be used up to 75 feet (23m) away from the main unit, and is convenient for on-demand training.
You can use batteries or electricity — it's your choice. But for best results we do recommend using the included AC adapter, especially in the early stages of training when the dog will be barking more. Battery life will vary depending on the weather, the quality of the batteries used, as well as how often the unit is being activated.
If you need to use batteries, rechargeables are a great option to save money. We also offer a new Solar Panel add-on!
Note: Please do not use aftermarket AC adapters ( those not purchased from Good Life® ) as this will void your product warranty.
No it will not. All Good Life products are designed to be safe and humane, and they are only designed to stop excess or nuisance barking. The high-pitched training sounds are not painful or harmful, and if a dog really needs to bark, he can. They will not stop a dog from barking out of instinct (at an intruder for example).
Although not harmful, the sounds emitted by our products may be too intense for puppies under one year of age as they are still developing their hearing. Please consult your veterinarian before using this product with puppies.
While many customers see the effects within a few days, this unit is a training device and will depend on how quickly the dog associates the sound with his barking. Some customers also report the dog barking at the unit, or barking more than usual in the first few days.
This is a normal part of the learning process. We strongly recommend you give the device two to three weeks to see full results.
For best results, the unit needs to be on and in use near the dog at all times (it will go into standby mode when the dog is not barking). For best results, the unit needs to be left on so that it can activate consistently each time the dog barks.
The ultrasonic sounds will emit in a cone shape of about 130°, or about 65° on each side. The sound is directional, and will have the best training results if the device is pointed directly at the dog(s) you wish to train.
